|
|
Home /
Products
/ Test &
Measuring Instruments
/ Oil Test system ( Model : OTS 2K1 ) |
|
Oil Test system |
|
Model : OTS 2K1 |
 |
|
INTRODUCTION The Oil Test system Model OTS 2K1 is
portable transformer oil Test system. It is a specially designed for accurate
measurement of Loss Factor, Permittivity & Volume Resistivity Measurement of
Transformer Oils & Petroleum jellys. The test frequency is
50 Hz / 60 Hz. The system is provided with Mode Selector Switch so that once the
oil cell is connected, it can measure all Three parameters in different modes
without handling the test leads. |
|
SPECIAL FEATURES |
 |
Single Equipment for Loss Factor, Permitivity & Volume
Resistivity Measurement of Transformer Oils & Petroleums.
Digital Readout of Insulation Resistance , Dielectric
Constant , Tan Delta & AC/DC Voltages.
Provision of Standard capacitor & Standard Resistor to
quickly verify the proper operation & calibration of System.
Provision of Guard terminal. No automatic guard
potential regulator is required.
Provided with Three Terminal Oil cell & Heating
chamber for Oil Cell
Digital Null detector provides highly accurate results.
The equipment is compact, light, portable & Table top
for Laboratory use.
|
|
TECHNICAL SPECIFICATIONS |
 |
| a) Loss Angle Ranges |
I] 19.99 % FSD with a resolution of 0.01%
II] 199.9% FSD with a resolution of 0.1% |
| b) Dielectric Constant Range |
0.10 to 10.00 |
| c) Test Voltage |
0-600 VAC continuosly variable or as ordered with
resolution of 1Volts. |
| d) Resistance Range |
10 Meg to 109 Meg in 7 Ranges which together with
Siva Three Terminal Oil Cell measures the resistivity
of the order of 62000 x 1012 Ohm Cm |
| e) Test Voltage |
+500 VDc with 0.1% stability. The power supply is
fully protected against accidental short circuit. |
| f) Indication |
3½ digit panel meter for Tan d %, Null, IR, Ac & Dc
Voltage. |
| g) Power supply |
230 V ± 10%, 50 Hz |
| h) Accuracy Tan d % |
± 1 % of the reading ± 2 digits. |
| i) Accuracy IR |
± 2 % ± 1 digit of FSD for First Four Ranges
± 4 % ± 1 digit of FSD for Last Four Ranges |
| j) Weight |
4 kg. approx. |
| k) Dimensions |
420 x 270 x 220 mm |
| j) Warm Up Time |
5 Minutes |
| SIVANANDA ELECTRONICS also
offers C & Tan delta Bridge with High Voltage Power Supply upto 12KV. ,
SF6 gas filled Standard Capacitors 100 pf/1000 pf upto 20 KV. ,
Oscillographic Null Detectors, High Voltage Insulation Testers upto 5KV
(Solid State),
Precision Current Transformers for range extension of C & Tan D Bridge
etc. For detailed information & product catalogue please write to us. |
|
|
| To keep pace with the latest technology
Sivananda Electronics reserves the right to update it's system.
Hence, information in the brochure is likely to change without
notice. |
|
|
|