These turnstiles combine aesthetic appeal with positive access control

ACCESS CONTROL SYSTEMS PAY FOR THEMSELVES THROUGH

• Better control of entry

• Improved manpower utilization

• Reliable, Quick and safe patron / Employee control

• Long, trouble free operation, with minimum maintenance

In sensitive areas the only way to ensure selectivity of entrance is to positively identity every person seeking admittance.

Turnstile ensures this selectivity by presenting a full height barrier that cannot be passed until after positive identification.

Control of the identification and therefore the unit can be by attendant operated push button or one of the variety of commercially available, well proven card reading security devices.

Constructed from Mild Steel with epoxy powder coated finish stainless steel. The equipment design permits maximum number of staff to be handled while at the same time provided necessary strength to resist unauthorized entry.

Dimensions and Technical Specifications

The full height turnstile, single and dual models are manufactured from mild steel pipe and angle iron structure to provide exceptional rigidity fitted with a central rotor of square section tube supporting 30 mm dia stainless steel tubes. The central rotor is hung from a self aligning bearing controlled at the top end by an electro mechanical head mechanism and located at the the lower end by a ball cone bearing.

A transformer / rectifies unit accepts 220 V  / 50 Hz and converts it to 24 VDC to power the head solenoids and the logic board which controls the functions of the unit.

The turnstile is capable of control in both directions, with the option of single direction control with the reverse direction locked or free upon request utilizing a push button fixed to the upright.

The Turnstile MK-2 is a double walkway version of the MK-1, interlocking the rotors in the central dead area to gain a space saving over two single units. Both walkways are capable if independent control as with the MK-1.

The barrier utilizes a positive action lock, which prevents two passes at one time. A self centering mechanism with hydraulic damping ensures barrier rotation to the reset positional anti back up device prevents reverse rotation once the head has moved 25⁰ from rest.

The turnstile can be configured to be either failsafe, so that when the mains power fails or is switched off, the rotor is locked in both directions.

The logic is compatible with most card readers and incorporates a built in timer to control entry functions.

Red and green status lamps (optional) are available to show when a card is accepted by the reader and the unit is open for access with the opposite color lamp being shown on the opposite side of the turnstiles.

The turnstiles gate is applies in kit form for easy assembly on site Sivananda Electronics will assemble and install on a prepared site if desired.

An environmental unit is available to enable the turnstile to be used in exposed conditions ( optional)

Walkway lights (optional) are available o indicate if the units is being used for entry, exit or bi-directionally.Flish mounted into the facia over the walkway the 120 mm square indicators show either a green entry arrow or a conventional red circle with white strips as a no entry sign.

Control of the modes of operation is by remote switch (optional)

Temperature range : 5⁰  to +55⁰
Suitable for : 115 or 240 V and 50Hz
Power Consumption : MK1 50 Watts MK2 100 Watts
Nominal Weight : MK1 400 Kgs MK2 610 Kgs

The company reserves the right to change specifications without notices.