|
|
Home /
Products
/ Test &
Measuring Instruments
/ Digital Surge Tester (
Model : DT210 ) |
|
Digital Surge Tester |
|
Model : DT210 |
|
|
 Digital
surge tester, Model DT-205/210The basic function and voltage range are
all same as ST-210E.Here output will be available in only one channel as there
is no need for connecting the master coil / motor every time. The operator can
do the comparison manually or the software can automatically compare the
waveforms, and give you a pass/fail result. The built-in monitor provides
the display of waveforms and the user interface menu. The control and operation
is very easy as the software is fully menu driven. The digital tester is very
useful when testing motors at site. |
|
TECHNICAL SPECIFICATIONS |
 |
| Max. Surge Voltage |
10KV continuous variable. |
| VOLTAGE Range |
0 to 100 KV AC |
| for DC armatures |
Test Position - I
Test Voltage : 0-1KV
Pulse Current : 1000A ( Max) |
| for 3 phase stators |
Test Position – II
Test Voltage : 0-10KV
Pulse Current : 660A ( Max) |
| Vertical Sensitivity |
Selectable 1,2,5,10KV full screen. |
| Input Voltage |
230V (± ) 10% 50Hz |
| Display |
Built-in LCD |
| DIMENSIONS |
L=575x B=300x H= 410mm ± 10mm |
| Weight |
65 Kg. Approx. |
|
APPLICATION |
|
|
The Surge Comparison Tester is useful for conducting Surge Test on
i. A.C. Motor Windings and Coils.
ii.D.C. Traction Motor and Generator Armatures and field coils |
|
DESCRIPTION OF THE EQUIPMENT |
|
|
The Surge Comparison Tester contains surge voltage generation and indication
sections. The amplitude of the generated surge voltage can be varied from 0 to
10,000 volts. This voltage is applied to the coils under test and the resultant
damped sinusoidal oscillations This oscillatory pattern reflects the inter turn
insulation and earth/ground faults. The surge tester has two positions of
testing.
C.1. Power on Switch
C.2. Automatic Voltage setting
C.3. Voltage Measurement (0 – 5000/10,000 volts)
C.4. Sockets for power input.
C.5. Red lamp to indicate surge on
C.6. Built-in LCD Display is provided to
F. Standard Accessories Supplied With DT-205/210
1. EHT cable leads for connecting surge outputs
2. Power input cable with 5A plug.
G. Optional Accessories
1. Three contact Armature Test Probe.
2. Bar-to-bar armature test probe
3. Three phase test select switch (to be ordered with the equipment) |
| To keep pace with the latest technology
Sivananda Electronics reserves the right to update it's system.
Hence, information in the brochure is likely to change without
notice. |
|
|
|
|
Sivananda Electronics 
(
Web Design ,
Web Hosting,
Search Engine Optimization
: SEO) 
QUICK LINKS
+91-253-2491816